55218 Suitable for stage projector lamp 55218
Product Parameter
| Part Numbers | 55218 |
| Fittable projector models | Suitable for stage projector lamp 55218 |
| Bulb Type | 440 W |
| Life time | 3000-4800(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Product Information
The Stage lights 55218 replacement lamps are compatiable with 55218
projectors.The working hour time is:3000-4800 hours,After repalcing
our new lamps,the projector performance can be the same of the new
original one and improve the effect of projection,and make you feel
comfortable while using.
Power off the projector
When you're finished using the projector, properly power it off.
Locate the power button on the projector or its remote control and
press it to turn off the projector. Wait for the projector to shut
down completely before disconnecting the power.
Bulb warranty
Remove the Old Lamp: Carefully detach the old lamp by following the
instructions provided in the user manual. In some cases, the lamp
may be held in place by screws or clips. Gently release the lamp
and disconnect any cables or connectors attached to it.
Install the New Lamp: Take the new lamp and align it correctly with
the lamp housing. Make sure it fits securely and matches the
connections of the previous lamp. Reconnect any cables or
connectors that were disconnected during the removal process.
Secure the Lamp Compartment: Once the new lamp is in place, secure
the lamp compartment by reattaching any screws or latches that were
removed earlier. Ensure that the compartment is sealed properly to
prevent any dust or debris from entering.
Reset Lamp Timer: After installing the new lamp, it is essential to
reset the lamp timer on the projector. This step varies by
projector model, so refer to the user manual for instructions on
how to reset the lamp timer.
Test and Calibrate: Turn on the projector and verify that the new
lamp is functioning correctly. If necessary, adjust the projector
settings to optimize the image quality and brightness.
