341297 Suitable for stage projector lamp 341297
Product Parameter
| Part Numbers | 341297 |
| Fittable projector models | Suitable for stage projector lamp 341297 |
| Bulb Type | 240 W |
| Life time | 3000-5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Product Information
The Stage lights 341297 replacement lamps are compatiable with
341297 projectors.The working hour time is:3000-5000 hours,After
repalcing our new lamps,the projector performance can be the same
of the new original one and improve the effect of projection,and
make you feel comfortable while using.
Disconnect the video source
After powering off the projector, disconnect the video source
device from the projector by removing the cable from both ends.
Bulb warranty
Remove the Old Lamp: Carefully detach the old lamp by following the
instructions provided in the user manual. In some cases, the lamp
may be held in place by screws or clips. Gently release the lamp
and disconnect any cables or connectors attached to it.
Install the New Lamp: Take the new lamp and align it correctly with
the lamp housing. Make sure it fits securely and matches the
connections of the previous lamp. Reconnect any cables or
connectors that were disconnected during the removal process.
Secure the Lamp Compartment: Once the new lamp is in place, secure
the lamp compartment by reattaching any screws or latches that were
removed earlier. Ensure that the compartment is sealed properly to
prevent any dust or debris from entering.
Reset Lamp Timer: After installing the new lamp, it is essential to
reset the lamp timer on the projector. This step varies by
projector model, so refer to the user manual for instructions on
how to reset the lamp timer.
Test and Calibrate: Turn on the projector and verify that the new
lamp is functioning correctly. If necessary, adjust the projector
settings to optimize the image quality and brightness.
