NP22LP/112-531 For NEC Projector Lamp NP-PH1000U NP-PX700W
NP-PX700W-08ZL
Product Parameter
| Part Numbers | NP22LP/112-531 |
| Fittable projector models | For NEC Projector Lamp NP-PH1000U NP-PX700W NP-PX700W-08ZL
NP-PX750U NP-PX750U-18ZL NP-PX800X NP-PX800X-08ZL |
| Bulb Type | 400 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Adjust the screen size
Most projectors have options for adjusting the size and position of
the projected image. You can typically find these options in the
projector's menu system
Product Information
The NEC NP22LP/112-531 replacement lamps are compatiable with
NP-PH1000U NP-PX700W NP-PX800X projectors.The working hour time
is:3000-5000 hours,After repalcing our new lamps,the projector
performance can be the same of the new original one and improve the
effect of projection,and make you feel comfortable while using.
Bulb warranty
Install the New Lamp: Take the new lamp and align it correctly with
the lamp housing. Make sure it fits securely and matches the
connections of the previous lamp. Reconnect any cables or
connectors that were disconnected during the removal process.
Secure the Lamp Compartment: Once the new lamp is in place, secure
the lamp compartment by reattaching any screws or latches that were
removed earlier. Ensure that the compartment is sealed properly to
prevent any dust or debris from entering.
Reset Lamp Timer: After installing the new lamp, it is essential to
reset the lamp timer on the projector. This step varies by
projector model, so refer to the user manual for instructions on
how to reset the lamp timer.
Test and Calibrate: Turn on the projector and verify that the new
lamp is functioning correctly. If necessary, adjust the projector
settings to optimize the image quality and brightness.
