LT60LPK/LT60LP For NEC Projector Lamp HT1000 LT220 LT240 LT245
LT260 LT265 LT60
Product Parameter
| Part Numbers | LT60LPK/LT60LP |
| Fittable projector models | For NEC Projector Lamp HT1000 LT220 LT240 LT245 LT260 LT265 LT60
WT600 LT240K LT260K HT1100 |
| Bulb Type | 220 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Set up the projector
Place the projector on a stable surface or mount it securely on a
ceiling bracket. Make sure it is positioned correctly and facing
the projection screen or wall
Product Information
The NEC LT60LPK/LT60LP replacement lamps are compatiable with
HT1000 LT220 LT240 projectors.The working hour time is:3000-5000
hours,After repalcing our new lamps,the projector performance can
be the same of the new original one and improve the effect of
projection,and make you feel comfortable while using.
Precautions
When handling the bulb, avoid direct contact with the glass portion
of the bulb. Use gloves or a clean cloth to prevent oil or dirt
from coming into contact with the lamp surface, which may shorten
lamp life or affect projection quality.
Ensure Safety: Before starting the installation process, make sure
the projector is turned off and has cooled down sufficiently.
Unplug the projector from the power source to avoid any electrical
accidents during the installation.
Refer to the User Manual: Consult the user manual provided by the
projector manufacturer for specific instructions on lamp
replacement. The manual will provide detailed information on the
lamp type, installation procedure, and any additional precautions
specific to your projector model.
Allow Lamp to Cool: Projector lamps generate heat during operation.
It is crucial to allow the lamp to cool down completely before
attempting to replace it. This prevents the risk of burns or damage
to the new lamp.
