LMP-E191 For Sony Projector Lamp Sony ES7 EX7 EX7+ EX70ES7 EX7 EX7+
EX70 TX7
Product Parameter
| Part Numbers | LMP-E191 |
| Fittable projector models | For Sony Projector Lamp LMP-E191 Sony ES7 Sony EX7 Sony EX7+ Sony
EX70 Sony VPL-ES7 Sony VPL-EX7 Sony VPL-EX7+ Sony VPL-EX70 Sony
VPL-TX7 Sony VPL-TX70 Sony BW7 |
| Bulb Type | 210 W |
| Life time | 3000 -5000(Hours) |
| Packing | Carton box with foam |
| Minimum Order quantity | 10 piece |
Image Quality
Projectors often boast high image quality with features such as
high resolution, brightness, and contrast ratio. These factors
contribute to sharp and vibrant visuals.
Product Information
The Sony LMP-E191 replacement lamps are compatiable with Sony EX7
Sony EX7+ Sony EX70 projectors.The working hour time is:3000-5000
hours,After repalcing our new lamps,the projector performance can
be the same of the new original one and improve the effect of
projection,and make you feel comfortable while using.
Precautions
Remove the Old Lamp: Carefully detach the old lamp by following the
instructions provided in the user manual. In some cases, the lamp
may be held in place by screws or clips. Gently release the lamp
and disconnect any cables or connectors attached to it.
Secure the Lamp Compartment: Once the new lamp is in place, secure
the lamp compartment by reattaching any screws or latches that were
removed earlier. Ensure that the compartment is sealed properly to
prevent any dust or debris from entering.
Reset Lamp Timer: After installing the new lamp, it is essential to
reset the lamp timer on the projector. This step varies by
projector model, so refer to the user manual for instructions on
how to reset the lamp timer.
Test and Calibrate: Turn on the projector and verify that the new
lamp is functioning correctly. If necessary, adjust the projector
settings to optimize the image quality and brightness.
